MIDWEST CLEANING TECHNOLOGIES

 

Home | Contact Us | Education | Rentals | Truck Mounts and Portables | Water, Fire & Mold Remediation | Tile, Grout, & Hard Surface 
Spotting, Cleaning & Odor Control | Speciality Products & Specials | Serum-System |

Midwest Cleaning Technologies - 513.398.2580

 

 

SQUARE SCRUB - EBG-20

Surface Preparation Machine


The EBG -20 machine has the ability to dry scrub several layers of finish off the floor without water or chemical involved. This green process should reduce slip and fall accidents for both workers and occupants. Injuries are expensive in many ways. From direct cost of the medical expenses and the indirect cost of not having important personnel available for normal work tasks can be daunting on your organization’s overall productivity.

The Square Scrub uses the SQP floor preparation pad which allows this product to be considered “planet friendly” and this new method of floor preparation can eliminate up to 95% of your chemical stripping needs. Since most of the Square Scrub’s process is completed dry and can be cleaned up with a dry vacuum, little water is used, therefore following the “green” stamp of approval. Using less water not only means helping this planet, but also making less trips to empty wet vacs and dirty mop water. Two light, damp rinses are all that are needed with this process. The Square Scrub process is also chemical free. Gone are the days filled with complaints of odor and potential harsh respiratory issues that come with conventional chemical strippers.

At only 62 dB, operators of this machine will be able to work throughout the day and not bother any surrounding occupants of the structure being worked on. This will allow extra time for more coats of finish to be laid if needed.

The Square Scrub EBG-20 is very easy to use and quick to learn. A new operator of the machine can become proficient within minutes instead of the hours a conventional rotary floor machine would take to become acquainted with. This allows for funds saved on training to be used elsewhere.

If you’re wondering where we came up with a name like Square Scrub, just take a look at its simple yet very efficient design. This design allows an operator to get very close to the edges and corners of flooring without the unpleasant physical hand methods of doddle bugging and blade scraping of edges. This also reduces the strain on the folks who do this type of work and makes the job much more pleasant.

The Square Scrub can prepare up to 1,600 square feet of flooring an hour in normal conditions with an experienced operator. Our customers routinely tell us that the EBG-20 saves them about 50 percent of the time compared to the conventional stripping process.

 

 

SQUARE SCRUB - EBG-20/G Gym Floor machine


The EBG20/G can screen up to 5000 sq ft of wooden gym floor per hour. The EBG20/G weighs in at a hefty 165 lbs and packs a 1.5 horsepower 3450 rpm motor. The EBG20/G’s weight increases pad pressure and produces superior results to rotary machines, even at high travel speed on the floor. The high rpm of the EBG20/G’s motor increases productivity and provides a smooth consistent preparation scratch. Many users have reported extended sanding screen life over rotary machines of up to 1000 sq ft per screen! Screen costs can be cut almost in half! The scratch mark produced by the EBG20/G is much less noticeable than the large round scratch swirl marks made with rotary machines. Always follow the manufacturer’s instructions for your favorite gym floor finish product. The Square Scrub EBG-20/G is equipped with a heavy duty 100 foot long 12 gauge power cord. This should be sufficient for most gym floors; if more cord length is needed to get Job done we recommend at least a 10 gauge extension power cord. The Square Scrub EBG20/G is based on the design of our best selling EBG20 floor preparation machine. The EBG20/G can be used for in the same manner as the EBG20 for refinishing resilient tile floors, however we recommend the use of our Dust Containment Kit when using the EBG20/G on resilient tile flooring. Ask your Square Scrub representative for more details.

 

 

SQUARE SCRUB - EBG-20/C


The EBG -20/C machine has the ability to dry scrub several layers of finish off the floor without water or chemical involved. This green process should reduce slip and fall accidents for both workers and occupants. Injuries are expensive in many ways. From direct cost of the medical expenses and the indirect cost of not having important personnel available for normal work tasks can be daunting on your organization’s overall productivity.

 

The Square Scrub uses the SQP floor preparation pad which allows this product to be considered “planet friendly” and this new method of floor preparation can eliminate up to 95% of your chemical stripping needs. Since most of the Square Scrub’s process is completed dry and can be cleaned up with a dry vacuum, little water is used, therefore following the “green” stamp of approval. Using less water not only means helping this planet, but also making less trips to empty wet vacs and dirty mop water. Two light, damp rinses are all that are needed with this process. The Square Scrub process is also chemical free. Gone are the days filled with complaints of odor and potential harsh respiratory issues that come with conventional chemical strippers.

At less than 73 dB, operators of this machine will be able to work throughout the day and not bother any surrounding occupants of the structure being worked on. This will allow extra time for more coats of finish to be laid if needed.

The Square Scrub EBG-20/C is very easy to use and quick to learn. A new operator of the machine can become proficient within minutes instead of the hours a conventional rotary floor machine would take to become acquainted with. This allows for funds saved on training to be used elsewhere.

If you’re wondering where we came up with a name like Square Scrub, just take a look at its simple yet very efficient design. This design allows an operator to get very close to the edges and corners of flooring without the unpleasant physical hand methods of doddle bugging and blade scraping of edges. This also reduces the strain on the folks who do this type of work and makes the job much more pleasant.

The Square Scrub can prepare up to 1,600 square feet of flooring an hour in normal conditions with an experienced operator. Our customers routinely tell us that the EBG-20 saves them about 50 percent of the time compared to the conventional stripping process.

 

 


 

Home | Contact Us | Education | Rentals | Truck Mounts and Portables | Water, Fire & Mold Remediation | Tile, Grout, & Hard Surface 
| Spotting, Cleaning & Odor Control | Speciality Products & Specials | Serum-System | 

©2008-2011 Midwest Cleaning Technologies. All Rights reserved. Do not duplicate without permission of Midwest Cleaning Technologies. 
Website design, developed & hosted by Agency Technologies, Inc.